Moparts Tech ArchiveAutomatic Trans.Neutral Safety SwitchesJohn posted this info and pics on the Q&A board.THX John John Kunkel The four switches used in the TF. The two at right are interchangeable if the proper wire connector is used. Here are the internal levers used with the various switches. The 3 pin switches are for the later model (68 and later) cars and trucks. The 2 outter pins are for the back up lights and the center pin is for the safety switch. There is a cupped rubber covered metal gasket that seals the switch, no O ring. The P/N is 2408123. NEED PART # for: NEUTRAL SAFETY SWITCH HARNESSbig john I need the part # for the neutral safety switch WIRE HARNESS for 72 Duster w/727. After taking a ride and noticed the headlights blinking on and off. I found that the plug had come off the trans. and burned on the exhaust. I hope it is just the harness and not the alternator/regulator. Is this a dealer item or aftermaket vendor? Thanks in advance.. John Blue66Charger Original P/N 21-113-24 for switch. beepbeep I think Bill Evans makes those. Leigh I can't remember the # for the connector with pigtail, but, you will get sticker shock when you price it. I will post it when I get home if no one else does. I think it's like $25-$30...I'm no electrical genius, but I'm sure the center is neutral ground, and the two outers are backup light grounds. John Russo http://www.buymopar.com/store/restro.html P/N 2926502, $16.19 John
Tech Index
|